APEX TWIN
This is a new Twin fin I’ve been working on to get away from the skatey / fishy feel some Twins have but with the same get up and go. To achieve this I have pulled the tail in drastically with a wing at the same point as the front edge of the fins, combining a soft panel curved channel to act like a vee and allowing water out through the rails easier. With the pulled in tail, the fins are closer together at around 9 inches apart, producing a smoother feel from rail to rail.
The mid section of the board has quite a bit of planing area still, to get up and go quickly and is complimented by a subtle single running into a bonzer double concave out the back. All of this with a pulled in nose around 13” and a low entry creates a dynamic, yet smooth performance twin, that loves a good hack in the pocket with zing. Best surfed a little longer than your height and width threshold around 20 inches wide.
The Apex Twins are designed for 2-5ft conditions.
Prices start from $1490
CUSTOM ORDERS
A deposit of $800 AUD is required to start the order process.
Once you have placed an order you will receive an email or phone call from Neal to chat about your requirement.
We can ship your order to anywhere in the world at additional freight charges. Please get in contact with us to give you a rough quote.
Current turn around time for a custom order is approximately 8-12 weeks.
This is a new Twin fin I’ve been working on to get away from the skatey / fishy feel some Twins have but with the same get up and go. To achieve this I have pulled the tail in drastically with a wing at the same point as the front edge of the fins, combining a soft panel curved channel to act like a vee and allowing water out through the rails easier. With the pulled in tail, the fins are closer together at around 9 inches apart, producing a smoother feel from rail to rail.
The mid section of the board has quite a bit of planing area still, to get up and go quickly and is complimented by a subtle single running into a bonzer double concave out the back. All of this with a pulled in nose around 13” and a low entry creates a dynamic, yet smooth performance twin, that loves a good hack in the pocket with zing. Best surfed a little longer than your height and width threshold around 20 inches wide.
The Apex Twins are designed for 2-5ft conditions.
Prices start from $1490
CUSTOM ORDERS
A deposit of $800 AUD is required to start the order process.
Once you have placed an order you will receive an email or phone call from Neal to chat about your requirement.
We can ship your order to anywhere in the world at additional freight charges. Please get in contact with us to give you a rough quote.
Current turn around time for a custom order is approximately 8-12 weeks.
This is a new Twin fin I’ve been working on to get away from the skatey / fishy feel some Twins have but with the same get up and go. To achieve this I have pulled the tail in drastically with a wing at the same point as the front edge of the fins, combining a soft panel curved channel to act like a vee and allowing water out through the rails easier. With the pulled in tail, the fins are closer together at around 9 inches apart, producing a smoother feel from rail to rail.
The mid section of the board has quite a bit of planing area still, to get up and go quickly and is complimented by a subtle single running into a bonzer double concave out the back. All of this with a pulled in nose around 13” and a low entry creates a dynamic, yet smooth performance twin, that loves a good hack in the pocket with zing. Best surfed a little longer than your height and width threshold around 20 inches wide.
The Apex Twins are designed for 2-5ft conditions.
Prices start from $1490
CUSTOM ORDERS
A deposit of $800 AUD is required to start the order process.
Once you have placed an order you will receive an email or phone call from Neal to chat about your requirement.
We can ship your order to anywhere in the world at additional freight charges. Please get in contact with us to give you a rough quote.
Current turn around time for a custom order is approximately 8-12 weeks.